Subaru Outback (BR): Antenna system
READ NEXT:
CAUTION
Do not use sharp instruments or window cleaner containing abrasives to clean
the inner surface of the window on which the antenna is printed. Doing so may damage
the antenna printed on th
Although FM is normally static free, reception can be affected by the surrounding
area, atmospheric conditions, station strength and transmitter distance. Buildings
or other obstructions may cause
SEE MORE:
A: INSPECTION
1) Remove the filler plug, and then check the gear oil. Replace the gear oil if it is contaminated, deteriorated or cloudy. <Ref. to DI-23, REPLACEMENT, Differential Gear Oil.>
2) Check that the gear oil level is within -5 mm (- 0.2 in) from the bottom of the filler plug hole.
A: REMOVAL
1) Remove the air intake boot assembly. <Ref. to IN(H4SO)-8, REMOVAL, Air
Intake Boot.>
2) Remove the two air breather hoses.
3) Remove the oil cap.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Use new O-rings.
C: INSPECTION
Check the hose for peeling, crack
© 2010-2026 Copyright www.suoutback.com
