Subaru Outback (BR): Dimensions
READ NEXT:
Engine oil
For the checking, adding and replacing procedure or other details, refer to “Engine oil” F11-12.
NOTE
The procedure for changing the engine oil and oil filter should be perf
SEE MORE:
A: REMOVAL
1. TRUNK LID DAMPER STAY
1) Open the trunk lid.
2) Remove the trunk lid damper stay.
Float the lock pin using a flat tip screwdriver, etc. and slide it.
Remove the trunk lid damper stay by pulling the damper stay mounting
point.
2. TRUNK LID HINGE
1) Open the trunk lid.
2) Remove
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Lift up the vehicle.
3) Remove the center exhaust pipe. <Ref. to EX(H4SO)-8, REMOVAL, Center Exhaust Pipe.>
4) Remove the heat shield cover.
5) Set the transmission jack under the transmission. Make sure that the support plate
© 2010-2024 Copyright www.suoutback.com