Subaru Outback (BR): Washer
To wash the rear window while the rear wiper is operating, turn the knob on the
end of the wiper control lever upward to the “
”
position. The washer fluid sprays until you release the knob. To wash the rear window
when the rear wiper is not in use, turn the knob on the end of the wiper control
lever downward to the “” position. The
washer fluid sprays and the wiper operates until you release the knob.
READ NEXT:
Defogger and deicer
1) Rear window defogger
2) Outside mirror defogger (if equipped)
3) Windshield wiper deicer (if equipped)
The vehicle is equipped with a rear window defogger. Some models are also equipped
with
Mirrors
Always check that the inside and outside mirrors are properly adjusted before
you start driving.
Type A inside mirror (if equipped)
The mirror has a day and night position. Pull the tab at the bottom of the mirror
toward you for the night position. Push it away for the day position. The night
position reduces glare from head
SEE MORE:
Front Hub Unit Bearing
A: REMOVAL
1) Lift up the vehicle, and then remove the front wheels.
2) Remove the axle nut.
CAUTION:
Do not loosen the axle nut while the front axle is loaded. Doing so may damage
the hub bearing.
Lift the crimped section of axle nut.
Remove the axle nut using a socket wrench while depressing
Extension Case
A: REMOVAL
1) Remove the transmission assembly. <Ref. to
5AT-37, REMOVAL, Automatic Transmission Assembly.>
2) Disconnect the rear vehicle speed sensor connector.
3) Remove the rear vehicle speed sensor.
4) Remove the extension case.
B: INSTALLATION
1) Attach the selected reduction driven
© 2010-2025 Copyright www.suoutback.com
