Subaru Outback (BR): Conditions in which front passenger’s SRS frontal airbag is activated
The front passenger’s SRS frontal airbag will be activated for deployment upon impact when any of the following conditions is met regarding the front passenger’s seat.
● When the seat is occupied by an adult.
● When a heavy article is placed on the seat.
When the front passenger’s seat is occupied by an adult, observe the following precautions. Failure to do so may lessen the load on the front passenger’s seat, deactivating the front passenger’s SRS frontal airbag despite the fact that the seat is occupied by an adult.
● Do not allow the rear seat occupant to lift the front passenger’s seat cushion using his/her feet.
● Do not place any article under the front passenger’s seat, or squeeze any article from behind and under the seat. This may lift the seat cushion.
● Do not squeeze any article between the front passenger’s seat and side trim/ pillar, door or center console box. This may lift the seat cushion.
If the passenger’s frontal airbag OFF indicator illuminates and the ON indicator turns off even when the front passenger’s seat is occupied by an adult
This can be caused by the adult incorrectly sitting in the front passenger’s seat. Turn the ignition switch to the “LOCK” position. Ask the front passenger to set the seatback to the upright position, sit up straight in the center of the seat cushion, correctly fasten the seatbelt, position his/ her legs out forward, and adjust the seat to the rearmost position. Turn the ignition switch to the “ON” position. If the OFF indicator remains illuminated while the ON indicator remains off, take the following actions.
● Turn the ignition switch to the “LOCK” position.
● Ensure that there is no article, book, shoe, or other object trapped under the seat, at the rear of the seat, or on the side of the seat.
● Ensure that the backward-forward position and seatback of front passenger’s seat
are locked into place securely by moving the seat back and forth. (Models equipped
with manual seats only)
● Next, turn the ignition switch to the “ON” position and wait 6 seconds to allow
the system to complete self-checking. Following the system check, both indicators
turn off for 2 seconds. Now, the ON indicator should illuminate while the OFF indicator
remains off.
If the OFF indicator still remains illuminated while the ON indicator remains off, ask the occupant to move to the rear seat and immediately contact your SUBARU dealer for an inspection.
READ NEXT:
Effect vehicle modifications made for persons with disabilities may have on
SUBARU advanced frontal airbag system operation (U.S. only)
Changing or moving any parts of the front seats, seat belts, front bumper, front
side frame, instrument panel, combination meter, steering wheel, steering column,
tire, suspension or floor panel c
Frontal airbag system operation
1) Driver’s side
2) Passenger’s side
The SRS airbag can function only when the ignition switch is in the “ON” position. The SUBARU advanced frontal airbag system i
Examples of the types of accidents in which deployment of the driver’s/driver’s
and front passenger’s SRS frontal airbag(s) is unlikely to occur.
1) The vehicle strikes an object, such as a telephone pole or sign pole.
2) The vehicle slides under the load bed of a truck.
3) The vehicle sustains an oblique offset frontal impact.
4) The vehi
SEE MORE:
Remote start confirmation transmitter feature
Your remote engine start transmitter is equipped with a unique bidirectional
confirmation feature. This feature will allow the transmitter’s backlit button to
display the status of the system under the condition that the vehicle and transmitter
are within the operational range of the system.
Basic Diagnostic Procedure of Airbag System
A: PROCEDURE
Check List for Interview
A: CHECK
Identification
A: PROCEDURE
Identify the vehicle using the chassis number, part number of the airbag control module or Subaru Select Monitor.
NOTE: Proper identification is necessary to ensure proper diagnosis. Components are not interchange
