Subaru Outback (BR): Recommended cold tire inflation pressure
Subaru Outback (BR) 2010-2015 Owners Manual / Consumer information and Reporting safety defects / Tire information / Recommended tire inflation pressure / Recommended cold tire inflation pressure
For the recommended cold tire inflation pressure for your vehicle’s tires, refer to “Tires” F12-8.
READ NEXT:
Vehicle placard
The vehicle placard is affixed to the driver’s side B-pillar.
Example:
The vehicle placard shows original tire size, recommended cold tire inflation
pressure on each tire at maximum loaded v
Measuring and adjusting air pressure to achieve proper inflation
Check and, if necessary, adjust the pressure of each tire (including the spare)
at least once a month and before any long journey. Check the tire pressures when
the tires are cold. Use a pressure
SEE MORE:
GPS Antenna
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the center panel assembly.
CAUTION:
Do not put your finger on the fin of the air vent grille. Doing so may damage
the fin.
Attach the protective tape (a) to the meter visor.
Insert a finger into the air vent grille and release
Wear indicators
1) New tread
2) Worn tread
3) Tread wear indicator
Each tire incorporates a tread wear indicator, which becomes visible when the
depth of the tread grooves decreases to 0.063 in (1.6 mm). A tire must be replaced
when the tread wear indicator appears as a solid band across the tread.
WARNIN
© 2010-2026 Copyright www.suoutback.com
